Vacuums these days can do more than vacuuming and cleaning floors. The process now is much easier and quicker than ever, with better efficiency, stronger suction power, and upgraded filters.
All the units from Shark are the best option for allergic consumers.
Like other vacuum cleaners, it’s a must to give your Shark vacuum regular maintenance so that it can work well for a long term. In today’s article, I’m going to provide the information of how to empty Shark vacuum.
Keep reading for more details…
Table of Contents
7 Steps to Empty Your Shark Vacuum
Undoubtedly, a Shark vacuum cleaner can accomplish lots of work for you. Imagine how much waste and grime that it will capture after hours of cleaning? I believe you will find a significant volume once opening the dustbin.
See also: Best 3 self emptying robot vacuum
When all the dirt are not removed, then your Shark unit will become blocked or stop working for sure. For its durability and longevity, it has to be maintained correctly and frequently.
So, don’t know how to empty a Shark vacuum?
This gadget comes with a plastic dustbin in which you will find dust and debris. There are some models featuring an indicator that will send you a signal when the bin is full, helping you go empty it instantly.
Here are steps to empty your Shark vacuum cleaner:
1. Turn off the device
2. Disconnect the power wire from the electrical outlet
3. Hold the tip of the dustbin handle
4. Press the button on the front of the handle to detach the bin from the vacuum
5. Press the button toward the bin bottom to empty it
6. Seal the bin bottom by pressing the button
7. Re-install the dustbin to the vacuum cleaner
As you may know, there are numerous Shark models on the market. Therefore, you need to check the manual of your model firstly to find out how to remove certain components from the unit for the maintenance. Fortunately, the process of emptying a Shark vacuum is the same for all models.
Also check out steps to clean Dyson vacuum with a click!
Ways to Clean Your Shark Vacuum
Here are several simple ways to quickly clean your Shark vacuum:
1. Unplug and uninstall
Before thinking about cleaning the gadget, you should unplug it first for your safety. Whether or not there’s any allergic member in your house, it’s much better to clean your Shark outside or the debris inside will turn the whole place into a mess. Place a sheet covering behind the vacuum to avoid an unsightly mound (optional).
2. Empty the dust canister
After uninstalling your vacuum, time to take out the canister and remove the dirt to a trash can. Once the canister is emptied, soak it in soapy water for a few minutes; then, wiping it down using a microfiber towel. According to the manufacturer, users can air dry after soaking and cleaning it in cold water.
3. Clean the filters
As soon as you remove the dirt canister from the vacuum, you will easily spot its filters. They seem to be made of foam rubber – this could be a bit different between Shark models.
When uninstalling the filters from the vacuum, gently tap them to loosen the dirt. Soak the vacuum’s foam filters in warm, soapy water. Clean them thoroughly. Please note that they will likely get discolored after a thorough cleaning. So, once you see the filters are discolored, it means they have got well cleaned.
After taking the filters out of the water, lay them on a mat to air dry for at least a day.
Shark suggests that foam or felt filters should be cleaned every three months or whenever the vacuum has any problem. If it stops working, the reason could be because the dirty filter.
When the vacuum is used frequently or if its suction power gets weaken, HEPA filter on requires to be cleaned every 12 months or more. If your Shark vacuum’s filters are wearing out, it’s time to replace them. Make sure to purchase the ones corresponding to your model.
4. Clean the hose
The next part of the vacuum that you should check is the hose. If there’s any stuck inside the hose, your gadget can’t complete its cleaning schedules. Once starting your maintenance, make sure to disconnect both ends of the hose.
Carefully inspect, and then pour a mixture of caustic soda and vinegar into the hose. Cover one end with your hand and aggressively shake for a couple of minutes. Hang it anywhere to dry completely and reconnect it to the device.
5. Clean the motorized floor nozzle head
The next step is to turn the nozzle on its side and place it on the floor. Softly tap on it to release dust, and then use an old toothbrush to remove debris or any other kind of filth.
One more thing – we often ignore the tiny hose connected to the motorized floor nozzle. In fact, you should clean it all thoroughly. Remove it from the head, check to see if it has obstructions or aperture blockages stopping your vacuum from working.
The lower duct hose has the same way cleaning as the central hose.
6. Put all parts together
When you reach this step, your cleaning process is coming to an end. Once everything is clean, it’s time to reassemble them. Importantly, you must ensure that each component is completely dehydrated. Finally, clean up the whole vacuum to keep the exterior as clean as the inside.
That’s all for how to empty Shark vacuum!
If the filter is too dirty, the suction power will decrease, causing the vacuum to stop its cleaning process. Dirty filters can also make it power on itself, telling the overheating issue. Cleaning the filter helps eliminate this problem and protects the vacuum’s system from getting damaged.
Remember to also empty the dustbin regularly. Uninstall the filter and clean the top of the dustbin will keep the filter dirt-free during the process. Giving your gadget the best maintenance guarantees the better performance and maximum suction.